No idea if there is anyone out there with technical skills
We have an Acure 3.6 Installed with an OWen Brothers Lora kit to provide external CT. The OB115 meter and OBM225 Lora modules are configured at the house end and appear to be working perfectly. The inverter end is approx. 80M away with an exteranl antenna conneted to the other OBM225 module with its RS485 output connected to the meter port of the Acure on pins 4&5 as per documentation. As soon as we switch the inverter to External CT and select the OBM115 meter as the source the inverter goes into error mode. We have checked all cabling and tested what we can. The RS485 port shows lots of activity as the inverter is talking to the OBM225 module. But alas we cannot get it to normal mode. Does anyone have any experience of setting these lora links up. All appear to be configed perfectly. Channels Frequency modes etc. Cheers