top of page

Line Drawings

I have produced some simplified line drawings that may be useful to show customers on how the inverter is wired to the battery. I hope they are useful if you need any others that are not shown here please let me know 😊


  1. Sunsynk Micro-inverter



2. Upgrading a micro inverters to add Storage



3. Basic Storage System


4. Multi Inverter System






5. Single Phase No Battery


6. 3 Phase No Battery


7. 3 Phase With Battery


8. Multi Inverter With Small Gen Set


9. Using Gen Set On Grid Input


10 Power Saver


Nano Grid System






2,575 views4 comments

Recent Posts

See All

The ultimate remote monitoring system!

Sunsynk Connect is the ultimate remote monitoring system! 📲✨ Now you can monitor your savings and control your inverter from anywhere, anytime. Whether you're at home, at work, or on vacation, Sunsyn

4 commentaires


I've been advised to connect existing 4kW grid tie inverter to AUX port of Sunsynk 8kw inverter and set as MI with export. I notice in your diagram 2 you have the existing inverter left as-us. Which is best please?

J'aime

Bandile Sibiya
Bandile Sibiya
07 mai 2021

Hi, i would like to see a drawing or explanation for connecting 6 inverters in parallel to form a three phase off-grid system. It will be 2 inverters per phase. It 6 x 8.8kW inverters and 160kWh battery storage using 20kWh x 8 of Freedom Won.

J'aime

The connection of 2 parallel inverters to AC at LOAD or GRID must be more clear. To which port does the GenSet connect? with single or multi inverters? With Multi inverters must Loads be split aux/smart and load, or combined everything to load? Will the inverters share the load equally in a multi inverter setup?

and if so how does it share load aux/smart?

J'aime

Mike Vos
Mike Vos
21 avr. 2021

The drawings are a step further than the manual but the details of connection in the inverter must be added. The connection of parallel inverters to AC at LOAD or GRID must be more clear. To which port does the GenSet connect? with single or multi inverters? With Multi inverters must Loads be split or combined? Will the inverters share the load equally in a multi inverter setup?

J'aime
bottom of page