top of page

Technical Support

Public·106 members

Ivan EndicottIvan Endicott
Ivan Endicott

Fans on the inverter

I know not required, but I am looking at taking care of my fanless ECO 5.5kW inverter, so I was going to mount 3*90mm PC fans underneath the heat sync at the back of the unit so they drag air upwards across the heat sync.


Has anyone else completed this. I can use a smart switch and node-red to read the inverter temperature and when the AC / DC gets above let's say 50°c it switches on the fans.


To fix them underneath I was going to place thin threaded bars between the heat sync fins and clamp the fans at the bottom and then run them off a 12v supply.


Anyone else completed this? Will it void any warranty as I won't do it if it does?


Regards



146 Views

Thanks, I've purchase 2 fans and a 12v Power Supply. Going to use the "Sunsynk AC Temp" \ "Sunsynk DC Temp" temperature that Home Assistant reads to switch on the Fans when the temperature get to something like 50oC.

Members

  • Rohit Rajput
    Rohit Rajput
  • cassie.lewis.zacassie.lewis.za
    cassie.lewis.za
  • rainer.krisch42
    rainer.krisch42
  • soniya kale
    soniya kale
  • Richard Graves
    Richard Graves
bottom of page