Sunsynk three-phase have inverter with 100% imbalanced load capability
Please find the user manuals and data sheets
Sunsynk three-phase hybrid inverter
top of page
Search
Recent Posts
See AllHow much does a SunSynk) gateway cost? The answer is absolutely nothing it’s built-in. Do you prefer an inverter with lights and LEDs or...
Sunsynk Connect is the ultimate remote monitoring system! 📲✨ Now you can monitor your savings and control your inverter from anywhere,...
9 komentarzy
bottom of page
I Have conflicting information on the 12kW 3 phase inverter regarding the maximum output power if using solar and grid.
If the inverter can deliver 4kW per phase that is 12kW total, and if connected to the grid together with solar this increases to 8kW per phase resulting in 24kW (data sheet indicates mac AC output to be 13.2 kW). So the 24kW is not possible . This is just for continuous load not peak for a few seconds.
Is my assumption correct?
Good day
I have a TBB LS75 Batteries system and would like to know if a 12kw Sunsynk inverter will be compatible?
Hi Keith
With reference to using a Li-ion battery without a BMS connection your past videos say that you should then set the battery type to AGM and on the battery charge page the equalization voltage should be set to 0V. On my 12kw Sunsynk Inverter it won't allow me to set the voltage lower than 41v.
Can you assist?
Hi Keith,
Does this inverter do load balancing on the 3 phases? If so does load balance on the backup laod and the on-grid laod?
Hi Keith
On the 3 phase 12kVA inverter, the installation manual stats that an 80A 3 pole Ac breaker should be used on the load side (page 29 Breaker 2). With a max continuous output of 19.1A this does not make sense.
Please advice.