Sunsynk 2 x 8KW restrict export KW
When Battery is fully charged, Setting Inverter power limiter to 1500 w (3KW 2 Inverters) it still trys to
push what ever the PV can produce anything from 9-19KW and Grid voltage goes high and shuts it off,
and I get a notification. It keeps trying until I set it back to zero export.
Why it does not just slowly increase the current up to the set limit.
If the PV is producing no more than about 4KW above house load it seems to work, I think the problem is because it puts + 9 out and there is not time for it to read CT and adjust before the High Voltage alarm.
Any Idea's how to solve it. Would installing a meter in place of CT help?
David
System:-
36 x JA 540w panels
9 on each MPPT on each inverter
5 x PylonTech 4.8Kw Batteries
2 x 8K SG01LP1-EU COMM:e424-MCU:5374