Pylontech US5000
I want to use 3 x Pylontech US5000 with a Sunsynk 5.0Kw Hybrid Inverter.
Will the settings be the same as for US2000 in the Sunsynk manual?
Any advice on the question are any other aspect welcome.
74 Views
top of page
Technical Support
Public·395 members
Members
- Piter Freide
- Will Smith
- Rohit Rajput
- Orbeat
bottom of page
I just configured two US5000 and the work well. I used the RJ45 cable supplied by Pylontech with the long leads plugged into the Cam socket on the inverter and into Cam on the first battery, Then used the short RJ45 that came with the battery to go from Link1 on the master battery to link 0 on the my second battery. I set the battery up as cam and left it as protocol 0 and it all worked. I had to increase the default maximum charge and discharge numbers to the max my inverter would support, which is 90amps.
Any questions please ask