Technical Support

1.      System mode settings - What happens if the 'use timer' box is unticked? Does the battery still provide power to the house / load in some form of clever way automatically?

2.      If 'use timer' box is ticked, then I understand that column 1 and 2 are timings for on and off in use timer mode

3.      What does column 3 mean - is it the maximum power the battery will provide to the house / load in the ‘use-timer’ mode?

-          And is it on demand of load?

-          It appears that if this is set to 3500W as an example, the battery is dumping 3000W into the house according to the C-T coil reading. I am certain that the actual consumption is not that. Similarly, if I set it to 1500W then that’s is what is fed to the house according to the C-T coil and again this is not what is actually consumed.

-           Is there a way of setting this so that battery will supply house / load according to the actual demand automatically?

4.      What does column 4 mean - is the power battery will supply as indicated in column 3 until it reaches a certain SOC and then the grid takes over?

Thanks in advance. I am finding the optimal settings difficult to navigate.