Switch to battery requires some time
SunSynk 12k. The problem is that when the grid is switched off (for some external reasons), the switch to the battery requires a short but valuable time: 1 sec. During this delay, all consumers are rebooted. Is it possible to reduce this switching time? All grid settings are defaulted.
96 Views
I have run experiment:
Use Timer = Yes. Mode for this period of time is "Charge from Grid"
Battery is charged to 99% (15kWh)
Sun is 3kW
Load is 1kW
Grid is on
Case 1:
Switch grid off
Result: No power supply to load interruption! Bingo!
Case 2:
Grid is on
Switch Sun panel off
Delay 10 sec for "stabilizing"
Switch Grid Off
Result: Power supply break for less than 1 sec.
Repeat case 1 and case 2 with Use Timer off - the same result.
So, when the sun energy is provided - no interruption.