Blue Nova 5.2KW
I connected 2 blue Nova 5.2Kw batteries in parralell to a 8kw Sunsynk interter for backup power.
The inverter is only connected to the essential load namely plugs and light circuits of the house or so it says in the main DB.
The system runs well when its power from the grid is no more however after 2 hours the battery just goes from 100 SOC to zero.We have set the maximum discharge at 25%. we have also connected the RS cable to the inverter but still no feedback can be displayed on the inverter.
Please help
31 Views
Interested to hear @Wendell your feedback.
I'll be purchasing the Sunsynk 8kw inverter tomorrow, however when it comes to the battery/batteries to purchase I'm at a cross roads here between Blue Nova 5.2kwh DU / Hubble 5.5kw AM2.
The issue which I've seen on many posts is the communication between these two batteries to the Sunsynk Inverter.
Where it's not very clear if the Blue Nova does communicate well with the Sunsync Inverter and how (through what cable etc) it communicates.
Hubble - According to Hubble, they say that their battery does communicate to the Sunsync inverter through a standard ethernet cable.