F18 HW Ac overcurrent fault
I am in South Africa with tons of load shedding.
I have an 8kw SS , 3 x Hubble am2 and 7 kw of panels.
Yesterday my aircon was on and drawing all the needed power from the panels BUT when loadshedding started and the grid went off ,my system conked , did its reset and then came back online quickly and continued to power the house and the aircon etc all from the panels.When load shedding ended and the grid was available there were no issues.
I will post this in the fault code section as well but I suspect its a grid setting .
Barring that my system works fine.
Any ideas?
98 Views
Thank you.Have changed the restart to 25%.Just want to mention this only happens when there is no grid !.Installer says he wants to check if the Neutral and earth are connected together in the inverter.
Regards