Sunsynk Connect app not displaying inverter values
Hi,
My Sunsynk 8kW inverter was installed yesterday. I configured the Sunsynk Connect app and for the first 20 minutes it showed the inverter values (see image below):
After that it just stopped showing any values (even when I do a manual refresh):
Wi-Fi is connected and the data logger is connected if I check the IP etc. I have restarted the app, reset my phone and restarted the router but do not get the app to display any values.
Any advice will be appreciated.
Thanks.
93 Views
Had this issue due ro Ct connection on inverter being connected on wrong terminals 5kw and 8kw differs